VORTEX VTU-374R FUEL AND IGNITION CONTROL X10 ECU YAMAHA YFZ450R YFZ450X 2009-2017
VORTEX VTU-374R FUEL AND IGNITION CONTROL X10 ECU YAMAHA YFZ450R YFZ450X 2009-2017 by Vortex at Trikes Motorcycles US. MPN: VTU-374R. Hurry! Limited time offer. Offer valid only while supplies last. The ECU is also fully programmable (Software not supplied-available at additional cost) with parameters that are far more extensive than those found
The ECU is also fully programmable (Software not supplied-available at additional cost) with parameters that are far more extensive than those found in any factory setting tools, such as Rev Limits, Throttle Enrichment & Decay time, Fuel timing, High Resolution Mapping, Dwell Timing, Voltage Output and trim tables for cold starting, air intake, baro, battery voltage , etc... In addition there is real time logging & graphing of many parameters. The ECU connects to a PC through our USB/Power adaptor which requires no external power source.We have done extensive work to include tune parameters which improve starting and almost eliminate the flameouts experienced with EFI mx bikes. All of the development work is done for you!
More & Smoother Power
Pre Programmed with 10 Performance Fuel & Ignition maps (changed by adjustable dial) developed on the Dyno & Track, all the work is done for you!
Instant Plug in Performance (replaces standard ECU with no mods to wiring required)
3 fuel trim switches to adjust fuel mapping by +12.5% to minus 10% in Lo, Mid and Hi throttle opening
Adjustments made using a screwdriver and switches provide visual feedback as to changes made
V-Boost - Programmable Voltage Boost Circuit for maximizing Spark Energy across the entire rev range
Higher Rev Limit (where required)
Robust design, fully waterproof with o-ring sealed switches
Diagnostic Flash codes, tests for sensor faults and flashes codes to FI light
Rubber Mounting Boot + Brackets supplied (where required)
Race Proven reliability
Handlebar switch (Optional upgrade at additional cost)- Dynamic Map Selection, easy installation with original plugs
Fully Programmable (PC Software - not included, available at additional cost)
Interface to Vortex Data Acquisition System and Wideband A/F Sensor
Fits: 2009-2018 Models.
Features & Highlights
- The Vortex ECU for the YAMAHA YFZ450R is like our CDI and EFI Interceptor rolled into one module.
- The ECU controls not only Spark timing and Voltage output but also Fuel Metering and other engine management functions.
- The result is more power, better power, easier starting and ultimately faster lap times. This unit comes pre-programmed with 10 Performance Fuel & Spark timing maps as well as having 3 additional switches for user trimming (adjusting) of Fuel in Lo, Mid and Hi throttle openings.
- The ECU plugs directly into the bikes standard wiring harness and interfaces with all the standard engine sensors such as ECT (Engine Coolant Temperature), IAT (Intake Air Temperature), MAP (Manifold Absolute Pressure), TPS (Throttle Position Sensor), CPS (Crank Position Sensor) to adjust fuel and spark timing for optimum power delivery in all weather, altitude and load conditions.
- Performance gains vary depending on throttle and RPM points however typically gains are in Top End power and Bottom End throttle response is expected from the Power settings and a smoother more tractable or rideable power from the Traction settings.
|Package Size:||6 x 2 x 2 inches|
Have questions about this item, or would like to inquire about a custom or bulk order?
If you have any questions about this product by Vortex, contact us by completing and submitting the form below. If you are looking for a specif part number, please include it with your message.
Related Best Sellers
mpn: 114-7452A 3,
MFG# 114-7452A 3 1147452A3...
We would like to share our 15 years of experience with our clients and help them find the right part for the problem. This product has a low defect rate, but a high return rate from customers: Either clients are buying to resolve a spark issue that i...
mpn: 856322, ean: 0675632815645,
COILSPEC coils are engineered to be the best replacement available. We use high grade materials and a unique design to reduce energy loss (hysteresis) ensuring excellent engine response, performance and fuel efficiency. COILSPEC has professional appl...
By Pwc Engine
mpn: PWC 113-6212 AC,
This Johnson Evinrude Power Ignition Pack will fit all models 200 Hp Loop Charged 1993-2001 6 Cyl. Outboard Part# 113-6212. Please check OEM#"s below for correct application of the item. Replaces OEM# 584636, 584637, 585114, 586212, 586661, 18-5781,...
By Parts Player
Engineered and manufactured to perfection, the ignition coil is designed to ensure fast and easy installation without compromising on performance and reliability. Quality-tested for enhanced durability and smooth operation, the ignition coil is manuf...
By A-Team Performance
mpn: HEI006BL BBF1BL 170072,
A-Team Performance BIG BOCK FORD BBF 351C 351M 429 460 BLUE HEI Distributor + 8mm SPARK PLUG WIRESA-Team Performance components offer a quality design at an affordable price. Features a quick 1 wire installation. Adjustable vacuum advance canister to...
By A-Team Performance
mpn: HEI008BL BBF1BL 170072,
A-Team Performance FORD FE 332 352 360 390 406 427 428 BLUE HEI Distributor + 8mm SPARK PLUG WIRESA-Team Performance components offer a quality design at an affordable price. Features a quick 1 wire installation. Adjustable vacuum advance canister to...
By Trail Tech
This is a complete Vapor installation kit. Comes with Trail Tech Vapor computer, power wire, RPM sensor, temperature sensor, speed sensor, handlebar mounting hardware and instructions.Fits: Honda Ruckus 02-12. The vapor motorcycle speedometer main fe...
By Parts Player
mpn: PP15423N-EZG-GOL 15423N,
Parts Player 86279801700 ----REPLACES---- E-Z-GO 25533-G01, 26993-G01, 27065-G01, Hitachi GSB107-10B, GSB107-10C ----USED ON---- EZ-Go (1980-2008) Interchange Part Number: 15423 25533-G01 26993-G01 27065-G01, GHI0003 APS15423 0410710 G102N G102NOE, 1...